Handleless Cabinetry
The Sharknose profile creates an integrated finger-pull detail, removing the need for separate handles.
View larger
Due to differing monitor colour specifications and settings, colours may vary from those of actual products and those displayed on screens. Viewing our full-sized panels is recommended for accurate colour. Compac Panels accepts no liability for any discrepancies or the implications of varying outcomes.
ZenoGrip
Gloss Alabaster GL
SKU: ZG AL
Suitable for
Gloss Alabaster GL is a gloss-finish ZenoGrip panel for handleless cabinet fronts and interior joinery. The Sharknose profile forms an integrated finger-pull detail without separate handles.
Trade pricing and online ordering are available to approved account holders.
Trade account ordering
Log in to view trade pricing and order online
Approved Compac Panels trade account holders can log in to view pricing and place orders online.
At a glance
Gloss Alabaster GL
| Substrate | Sheet size (mm) | 18 |
|---|---|---|
| HMR MDF | 2420mm x 196mm | × |
| HMR MDF | 2420mm x 396mm | × |
| HMR MDF | 2420mm x 796mm | × |
× Available to order
Manufacturer-Ready Profile
Supplied in long lengths so joiners and manufacturers can complete the final processing of cabinet fronts in-house.
Clean, Streamlined Finish
Designed to create clean, minimal cabinet fronts for contemporary interior joinery.
Matching Edging Available
Matching Alabaster Gloss edging is available to help create a consistent finish on exposed edges.
About this product
Overview
Gloss Alabaster GL combines a gloss decorative surface with the ZenoGrip handleless cabinetry system. Compac Panels supplies the Sharknose profile in long lengths so joiners and manufacturers can complete the final processing of cabinet fronts in-house.
The integrated grip detail removes the need for separate handles and is designed to simplify the specification and manufacture of clean, contemporary doors and drawer fronts.
Current available configurations are shown in Configure & Order. Matching Alabaster Gloss edging is available for exposed edges.
Built for the job
Product features
Easy to Clean
Smooth surface designed for straightforward everyday cleaning and maintenance.
Environmental
Includes environmental considerations within the product materials or manufacturing system.
Impact Resistant
Designed to withstand everyday knocks and impacts in suitable interior applications.
Quality
Manufactured for a consistent finish and dependable panel performance.
Recyclable
Selected materials can be recycled where suitable recycling facilities are available.
Resists Fading
Designed to help maintain its appearance and colour over time.
Stain Resistant
Surface helps resist common marks and stains during everyday use.
Vertical Application
Suitable for vertical interior surfaces such as cabinetry, panels and joinery.
Waterproof
Waterproof surface feature for suitable interior applications; correct substrate, edging and installation remain important.
Product information
Details & resources
Applications
Kitchen Cabinetry
Kitchen cabinet doors and drawer fronts.
Wardrobes & Storage
Wardrobe and storage cabinetry.
Built-in Joinery
Built-in interior joinery.
Furniture
Furniture and custom cabinetry.
Commercial Interiors
Commercial interior joinery.
Technical & care notes
Range technical details
ZenoGrip uses a 45° recessed Sharknose profile with a 5mm top edge to create the integrated finger-pull detail. The system is designed for efficient manufacture of handleless cabinet fronts and interior joinery, with long-length panels supplied for final processing by joiners and manufacturers.
Available substrate, thickness and sheet-size combinations should always be taken from the current product variation data on the Compac Panels website.
Product notes
Screen colours can vary from the actual product, so viewing a physical sample or full-size panel is recommended where colour accuracy is important.
ZenoGrip is supplied as a Sharknose profile in long lengths, ready for the manufacturer to complete the final processing of cabinet fronts.
Care & restrictions
ZenoGrip is intended for interior cabinetry and joinery applications. Panels should be stored, handled, processed and installed in accordance with Compac Panels’ current product and care guidance.
Avoid prolonged exposure to excessive moisture, humidity or conditions outside the intended interior application. Final suitability should be confirmed against the current substrate, edging, installation and technical requirements for the specific product being used.
How to specify
1. Select the ZenoGrip colour and finish required.
2. Confirm the current substrate, thickness and available panel size for that product on the Compac Panels website.
3. Select the appropriate ZenoGrip profile and process the panel to suit the required cabinet door or drawer dimensions.
4. Confirm matching edging, installation requirements and any other project-specific technical requirements before manufacture.
Good to know
Frequently asked questions
What is Gloss Alabaster GL?
Gloss Alabaster GL is a gloss-finish ZenoGrip panel for handleless cabinet fronts and interior joinery.
What is ZenoGrip used for?
ZenoGrip is used for handleless cabinet fronts, drawers and interior joinery where a clean, integrated finger-pull detail is required.
What profile does ZenoGrip use?
ZenoGrip uses a Sharknose profile supplied in long lengths for joiners and manufacturers to complete the final processing of cabinet fronts.
What configurations are available for Gloss Alabaster GL?
Current substrate, laminate, thickness and size options are shown in the Configure & Order selector on this product page.
Is matching edging available for Gloss Alabaster GL?
Yes. Matching Alabaster Gloss edging is available for exposed edges.
Does ZenoGrip require separate handles?
No. The Sharknose profile is designed to form the integrated finger-pull detail for handleless cabinetry.
Finish the job
Matching edging & accessories
Matching accessory
Edge Band – Alabaster Gloss – Preglued 22-1mm
SKU: EB ALG P01 22 View / order product ↗
Matching accessory
Edge Band – Alabaster Gloss – Unglued 22-1mm
SKU: EB ALG U01 22 View / order product ↗
Matching accessory
Edge Band – Alabaster Gloss – Laser 22-1mm
SKU: EB ALG L01 22 View / order product ↗Explore more
Related products
Need a hand?
Need help choosing the right panel?
Request a sample to check the Gloss Alabaster GL colour and finish in person, or contact the Compac Panels team if you need help with sizing, product selection or your joinery application.
